| WORKING | FLAT PARTS OF THE WHOLE PIECE | PARTS OF EDGE | WHOLE OF EDGE | |||
| VERSION | F43 | F53 | F54 | F64 | EK40 | E44 |
| TABLES | 2 | 2 | 2 | 2 | 1 | 2 |
| POLISHING UNITS | 4+3 | 5+3 | 5+4 | 6+4 | 4 | 4+4 |
| POWER, Kw | 143 | 164 | 185 | 206 | 58 | 118 |
| WEIGHT, TON | 32 | 36 | 40 | 44 | 14 | 28 |
Table of pieces loadable on the pliers, average working time and hourly production.
| FORKS | 32 pcs 38 sec 3.030 pcs/h |
32 pcs 30 sec 3.840 pcs/h |
32 pcs 28 sec 4.100 pcs/h |
32 pcs 26 sec 4.400 pcs/h |
400 pcs 150 sec 4800 pcs/h |
400 pcs 150 sec 9600 pcs/h |
| SPOONS | 22 pcs 40 sec 1.980 pcs/h |
22 pcs 32 sec 2.470 pcs/h |
22 pcs 30 sec 2.640 pcs/h |
22 pcs 28 sec 2.820 pcs/h |
400 pcs 180 sec 4000 pcs/h |
400 pcs 180 sec 8000 pcs/h |
| KNIVES | 36 pcs 60 sec 2.160 pcs/h |
36 pcs 50 sec 2.590 pcs/h |
36 pcs 48 sec 2.700 pcs/h |
36 pcs 40 sec 3.240 pcs/h |
40 pcs 120 sec 1.200 pcs/h |
40 pcs 120 sec 1.200 pcs/h |
Machines for polishing
of flatware
The model P1100-F is used for the polishing of the flat parts of flatware and knives, it is equipped with double brush wheel with a working length of 1,100 mm. Each wheel can be driven in the three main direction X-Y-Z, it m eans every polishing station has 6 axis controlled by CN through servomotors electronic adjustment of the stroke, of the speed and of the working pressure, possible to program the multiple cycle on the same station. Easy programming and memorization of the working program with storage in the CN memory. Double table for the whole working of the piece and in contemporaneity of front and back parts. Includes automatic device for transferring the pieces from the first to the second table.
Specification for “Edges” of flatware and knives.
Specification for “Edges” of flatware and knives.
it is equipped with single brush wheel with a working length of 1,100 mm. The copy of the profile id done automatically, with possibility of different cycles of polishing, it can be done on each station.
Details common to all versions.
